API Slab Gate Valve
Product Description
Type: Direct-acting Connection Form: Flange Actuator: Pneumatic Thread Position of Valve Rod: Inside Gate Valve Standard: ANSI Size: 2′-24′′ O-Ring Sealing: PTFE,NBR,Rptfe Trademark: FYV Origin: Wenzhou, Zhejiang Material: Carbon Steel Pressure: Ordinary Pressure Seal Surface: Wedge Gate Valve Usage: Flow Control Application: Industrial Usage Class: 150lb-300lb Ends Con: RF,Rtj,Sw,Bw Specification: CE, SGS HS Code: 8481804090 1. Full-bore designed, can be widely used on pipelines that need to be cleaned by tube cleaner, and never cause block or damage to valve and the fittings.
2. Floating seat structure provides soft-hard sealing.
3. Metal to metal seal: Valves will be deposit-welded with hard sealing alloy directly.
4. Unique top-assembled design enables all trims be replaced in line.
5. The chamber is entirely isolated from medium when the valve is fully opened or closed. Under any accident, it's possible to remove malfunction, drain and replace packing after releasing pressure.
6. When leakage happens around sealing face accidentally, sealing gum should be injected right after releasing the pressure through grease injection, so as to carry out further measure. (Attention: This method can only be used to cope with emergency before carrying out any measure. )
7. Because of the absolutely bidirectional sealing, when the pressure of the valve rises abnormally, making it impossible to vent the pressure directly through the sealing face, the security of pipelines and facilities can be ensured by the safety valve installed on the body.
8. The valve is designed to be fireproof, in accordance with JB/T6899 and API-6FA, and can be installed at any angle.
9. Manually operated valve can be operated by both handwheel and gearwheel. The selection of autocontrol actuator depends on specific requirement, such as pneumatic equipment, fluid drive and electric equipment, in order to control the valve locally or distantly or through computer. The valve can be used as quick interception valve when it is pneumatic, and it only takes less than 30 seconds to finish the whole process.
10. The valve can be flanged or butt welded. GB, JB, ZB, SH, HG, CJ and ISO, ANSI standards can be adopted according to specific requirements.
Product parameter
Contact us if you need more details on Gate Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cast Steel Gate Valve、Slab Gate Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.
2. Floating seat structure provides soft-hard sealing.
3. Metal to metal seal: Valves will be deposit-welded with hard sealing alloy directly.
4. Unique top-assembled design enables all trims be replaced in line.
5. The chamber is entirely isolated from medium when the valve is fully opened or closed. Under any accident, it's possible to remove malfunction, drain and replace packing after releasing pressure.
6. When leakage happens around sealing face accidentally, sealing gum should be injected right after releasing the pressure through grease injection, so as to carry out further measure. (Attention: This method can only be used to cope with emergency before carrying out any measure. )
7. Because of the absolutely bidirectional sealing, when the pressure of the valve rises abnormally, making it impossible to vent the pressure directly through the sealing face, the security of pipelines and facilities can be ensured by the safety valve installed on the body.
8. The valve is designed to be fireproof, in accordance with JB/T6899 and API-6FA, and can be installed at any angle.
9. Manually operated valve can be operated by both handwheel and gearwheel. The selection of autocontrol actuator depends on specific requirement, such as pneumatic equipment, fluid drive and electric equipment, in order to control the valve locally or distantly or through computer. The valve can be used as quick interception valve when it is pneumatic, and it only takes less than 30 seconds to finish the whole process.
10. The valve can be flanged or butt welded. GB, JB, ZB, SH, HG, CJ and ISO, ANSI standards can be adopted according to specific requirements.
Product parameter
| Main material | WCB, WCC, LCB, CF8, CF8M, CF3, CF3M, CN7M, CF8C, 4A, A105, LF2, F304, F316, F304L, F316L, F321, F51, ect. |
| Pressure rating | Class 150 to Class 2500 (PN2.5 to PN 420) |
| Standards applied | API. ASME, ANSI, NACE, CE/ EN, DIN, JIS, BS, ISO, TS, GB, etc. |
| Operative temperature | -196 °C to 980 °C ( -320.8 °F to 1796 °F) |
| Optional operation | Manual, Gear, Electric, Pneumatic, Hydraulic. |
Product Categories : Slab Gate Valve
Premium Related Products
Other Products
Hot Products
QE series pneumatic quick exhausting valve air exhaust valveLow Price 100-400 Series Vale Manifolds Solenoid Valve BaseSMC Air Filter Combination Air source treatment for AC3000-033/2Way Airtac Solenoid Valve AC110V With 3V210-08DMF-Z Series Air Pneumatic Pulse Valve For High Quality4/2Way Pneumatic AC220V Electric Control Valve With Q24DH-08Ningbo K Series Pneumatic Vibrator for Low PriceAPL-2N Series 12V Pneumatic Limit Switch With High QualityChina Wholesale Quick Connect Tube Plastic Pneumatic Fitting With PC1/4-02Hot Selling AT-32 Pneumatic Actuator With High QualityDN50 Stainless Steel Body 3PCS Pneumatic Ball Valve With Q611F-16PSC Type Standard Pneumatic Series Air Cylinder For Double ActingGood Price US Series Pilot-Operated Steam Solenoid Valve For G PT NPTTwo-way Double Actuator Piston-Operated Angle Seat Valve With Plastic HeadNormally Closed Stainless Steel Fluid Solenoid Valve 2S200-20Two-Way Direct Acting Water Solenoid Valve 2W160-15