API 6D Electric Wc6 High Pressure Slab Gate Valve
Product Description
Type: Straight-through Connection Form: Flange Actuator: Electric Thread Position of Valve Rod: Outside Gate Valve Standard: ANSI Size: 2′′-48′′ Ends Con.: Bw,Sw,Rtj,RF Trademark: FYV Origin: Wenzhou, Zhejiang Material: Carbon Steel Pressure: Ordinary Temperature Seal Surface: Wedge Gate Valve Usage: Safety Application: Industrial Usage Class: 150~1500 Operation: Handwheel,Electric,Pneumatic Specification: CE, SGS HS Code: 8481804090 Due to advanced experience and technique adopted in design and manufacture, our Slab Gate Valve has been widely used in numerous fields, as a switching facility installed on transportation pipelines of natural gas, petroleum and petrolic products, or pipelines for chemical-industry, environmental protection, and on equipments for storing oil and gas.
1. Embed the seat with PTFE ring, blow-weld the gate with hard alloy so as to reinforce the sealing surface. Double-sealing that can be protected by injecting grease.
2. Flexible to open and shut with small torque that is only 1/3~1/2 times as much as that of general valves.
3. The unique three-layer adjustable packing structure insures seal and reliability of bonnet and stem.
4. Easy to operate and maintain.
5. Slab gate valve with a guiding hole is used on pipeline needs cleaning with the tube cleaner, while slab gate valve without a guiding hole is used on pipeline needs not cleaning.
6. Adjustable slab gate valve can be installed on exit of pump, station, and pipeline of which the medium needs to be adjusted and stop.
7. Slab gate valve of WB type can be installed on any angle (horizontal, vertical, acclivitous), and is more convenient to drain.
8. Speediness-interrupted slab gate valve with buffer can be open and shut rapidly, without striking when closing, and the novel pneumatic, manual switching structure, makes it flexible to operate, and more convenient and reliable.
9. AT type with low pollution to medium can be widely installed on transportation pipelines in airport and storage equipment of oil and gas, or pipelines with natural gas, petroleum and petrolic products, or for chemical industry, entironment protection.
10. VT type with non-rising stem and accurate intuitionistic indicator, of which the height has been shortened effectively, is more convenient to operate and maintain. The gate with a guiding hole can protect the sealing face effectively, and can be cleaned with tube cleaner.
11. Slab gate valve of VS type can be buried underground with pipelines for a long time, is the best choice for pipelines of city gas, natural gas and petroleum. Besides the advantages of the VT type, the inside surface of the VS type is treated with epoxy coating while the outside surface is painted with corrosion-protection layer.
12. Slab gate valve of WP type lightens the burden of pipelines effectively. Its special structure and light body makes it especially appropriate for storage equipment of oil and gas.
13. Electric slab gate valve involves integral explosion-proof type, explosion-proof type and general type. Limitorque, the USA Rotork, England Auma, Germany will be chosen according to user's requirement, or chosen internally.
Main Feature:
1) The seat ring uses the floating seat ring structure with O-Seal Ring sealed and pre-tightening force applied to have inlet and outlet dual-way sealed, and the open-close moment with this structure is 1/2 that of the common valves only, able to lightly open and close valve.
2) When fully opened, the valve's channel is smooth and linear,with an extremely small flow resisting coefficient and no pressure loss ,and the pipeline can be cleaned with hair-ball through it .
3) Automatic removal of the high pressure in the internal cavity when the valve is about to close so as to ensure safety.
4) Fully sealed structure leaves a good protective property, suitable for the requirement of 24-hour duty.
Standard for gate valves:
Design manufacture standard: API 6D
Length of structure: API 6D
Flange connecting end: ASME B16.5/ASME B16.47
Butt welding connecting end: ASME B16.25
Wall thickness: ASME B16.34
Inspection and test: API 6D
Pressure and temperature rating: ASME B16.34
Contact us if you need more details on Slab Gate Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Gate Valve、Api Gate Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.
1. Embed the seat with PTFE ring, blow-weld the gate with hard alloy so as to reinforce the sealing surface. Double-sealing that can be protected by injecting grease.
2. Flexible to open and shut with small torque that is only 1/3~1/2 times as much as that of general valves.
3. The unique three-layer adjustable packing structure insures seal and reliability of bonnet and stem.
4. Easy to operate and maintain.
5. Slab gate valve with a guiding hole is used on pipeline needs cleaning with the tube cleaner, while slab gate valve without a guiding hole is used on pipeline needs not cleaning.
6. Adjustable slab gate valve can be installed on exit of pump, station, and pipeline of which the medium needs to be adjusted and stop.
7. Slab gate valve of WB type can be installed on any angle (horizontal, vertical, acclivitous), and is more convenient to drain.
8. Speediness-interrupted slab gate valve with buffer can be open and shut rapidly, without striking when closing, and the novel pneumatic, manual switching structure, makes it flexible to operate, and more convenient and reliable.
9. AT type with low pollution to medium can be widely installed on transportation pipelines in airport and storage equipment of oil and gas, or pipelines with natural gas, petroleum and petrolic products, or for chemical industry, entironment protection.
10. VT type with non-rising stem and accurate intuitionistic indicator, of which the height has been shortened effectively, is more convenient to operate and maintain. The gate with a guiding hole can protect the sealing face effectively, and can be cleaned with tube cleaner.
11. Slab gate valve of VS type can be buried underground with pipelines for a long time, is the best choice for pipelines of city gas, natural gas and petroleum. Besides the advantages of the VT type, the inside surface of the VS type is treated with epoxy coating while the outside surface is painted with corrosion-protection layer.
12. Slab gate valve of WP type lightens the burden of pipelines effectively. Its special structure and light body makes it especially appropriate for storage equipment of oil and gas.
13. Electric slab gate valve involves integral explosion-proof type, explosion-proof type and general type. Limitorque, the USA Rotork, England Auma, Germany will be chosen according to user's requirement, or chosen internally.
Main Feature:
1) The seat ring uses the floating seat ring structure with O-Seal Ring sealed and pre-tightening force applied to have inlet and outlet dual-way sealed, and the open-close moment with this structure is 1/2 that of the common valves only, able to lightly open and close valve.
2) When fully opened, the valve's channel is smooth and linear,with an extremely small flow resisting coefficient and no pressure loss ,and the pipeline can be cleaned with hair-ball through it .
3) Automatic removal of the high pressure in the internal cavity when the valve is about to close so as to ensure safety.
4) Fully sealed structure leaves a good protective property, suitable for the requirement of 24-hour duty.
Standard for gate valves:
Design manufacture standard: API 6D
Length of structure: API 6D
Flange connecting end: ASME B16.5/ASME B16.47
Butt welding connecting end: ASME B16.25
Wall thickness: ASME B16.34
Inspection and test: API 6D
Pressure and temperature rating: ASME B16.34
| Main material | WCB, WCC, LCB, CF8, CF8M, CF3, CF3M, CN7M, CF8C, 4A, A105, LF2, F304, F316, F304L, F316L, F321, F51, ect. |
| Pressure rating | Class 150 to Class 2500 (PN2.5 to PN 420) |
| Standards applied | API. ASME, ANSI, NACE, CE/ EN, DIN, JIS, BS, ISO, TS, GB, etc. |
| Operative temperature | -196 °C to 980 °C ( -320.8 °F to 1796 °F) |
| Optional operation | Manual, Gear, Electric, Pneumatic, Hydraulic. |
Contact us if you need more details on Slab Gate Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Gate Valve、Api Gate Valve. If these products fail to match your need, please contact us and we would like to provide relevant information. Product Categories : Slab Gate Valve
Premium Related Products
Other Products
Hot Products
QE series pneumatic quick exhausting valve air exhaust valveLow Price 100-400 Series Vale Manifolds Solenoid Valve BaseSMC Air Filter Combination Air source treatment for AC3000-033/2Way Airtac Solenoid Valve AC110V With 3V210-08DMF-Z Series Air Pneumatic Pulse Valve For High Quality4/2Way Pneumatic AC220V Electric Control Valve With Q24DH-08Ningbo K Series Pneumatic Vibrator for Low PriceAPL-2N Series 12V Pneumatic Limit Switch With High QualityChina Wholesale Quick Connect Tube Plastic Pneumatic Fitting With PC1/4-02Hot Selling AT-32 Pneumatic Actuator With High QualityDN50 Stainless Steel Body 3PCS Pneumatic Ball Valve With Q611F-16PSC Type Standard Pneumatic Series Air Cylinder For Double ActingGood Price US Series Pilot-Operated Steam Solenoid Valve For G PT NPTTwo-way Double Actuator Piston-Operated Angle Seat Valve With Plastic HeadNormally Closed Stainless Steel Fluid Solenoid Valve 2S200-20Two-Way Direct Acting Water Solenoid Valve 2W160-15