API6d Forged Steel Metal Seated Fixed Ball Valve
Product Description
Material: Stainless Steel Driving Mode: Turbine Channel: Straight Through Type Type: Fixed Ball Valve Temperature: Normal Temperature Size: 2′′-48′′ Ends Con,: RF,Rtj,Sw,Bw Trademark: FYV Origin: Wenzhou, Zhejiang Connection Form: Flange Nominal Pressure: ANSI CLASS 150-900 Structure: Fixed Ball Valve Function: Relief Valve Application: Industrial Usage Class: 150lb-1500lb Operation: Gearbox Specification: CE, SGS HS Code: 8481804090 StandaRds
API Trunnion Ball Valve
Design and Manufacture: API 6D, ASME B16.34(BS5351), API608, MSS-SP-72
Face to face dimension: ASME B16.10, API 6D
Flange connection dimension: ASME B16.5
BW connection dimension: ASME B16.5
Test and inspection: API 598, API 6D
Fire-safe design: API 607
MAIN FEATURES
Fire-SaFe Test
Approved trunnion ball valves are designed in accordance with API 607 & API SPEC 6FA. When non-metal seats are destroyed in a fire, the medium pressure push the upstream seat into the ball to cut off the line fluid and prevent internal leakage due to a secondary metal-to-metal seals. When the first soft seal is damaged, body, bonnet, stem-gasket can reach sealing function and prevent external fluid leakage.
Double body Gasket
All trunnion ball valves are equipped with two body gasket. The first body gasket is in soft material and the second in graphite (if not otherwise required), this combination assures the best seal characteristic in whatever corrosive service as well give fire safe design.
ANTi-static device In order to prevent static electricity which may light the fluid, static-conduction spring is set between the stem trunnion and the ball.
AnTi blow-ouT prooF STem
The stem is designed with integral T-Type shoulder to provide blow-out proof effectively. The design assures that the stem can not be blown out of the valve in the case of the packing being removed while the valve is under pressure.
CONTROLLED STEM & STUFFING BOX FINISH
Stem and stuffing box finish machining is a key point of control. The stem is made by cold rolling and stem surface finish is controlled by Ra=0.4, which can reduce friction for stem moving and ensure the seal. The stuffing box surface is controlled within Ra=1.6 for better sealing performance.
SOLID BALL
The solid ball used by FANGYUAN provides straight through flow and real full-port performance characteristics. Hollow ball or cored cavity ball are not used for products.
BALL SEAT ALIGNMENT
Stem/Flange mechanical stops ensure control and precise alignment over ball rotation.
LONGEVITY OF LIFE
Special consideration was devoted to the attainment of enhanced life and operation of our valve throughout design, development, testing and manufacturing stages. Valve designs combined with the selection of advanced materials are such that long periods of inactivity should not affect the operations of efficiency.
FLOW CAPACITY
Valve design allows for high flow capacity in liquid or gas services regardless of whether the media is clean or dirty. Full port valves allow for pigging and ensure maximum flow capacity.
FIELD REPARAIBLE
Simple user friendly design allows for quick and easy part replacement requiring minimal"Down Time".
EMERGENCY SEALANT INJECTION
For 6" full port and larger each valve is supplied complete with emergency stem sealant injection feature.
INSPECTION AND TESTING
Every valve is subjected on routine base to different non-destructive testing, like the dye penetrant test on butt weld ends, on all hard faced and cladding areas. Non-destructive test are also carried out on the critical areas as defined by ANSI B. 16.34.
Optional examinations like:
Radiographic
Magnetic particicles
Ultrasonic
MARKING AND IDENTIFICATION
Each valve is identified on proper name plate and on valve body as required by MSS- SP 25, B 16.34 Name plate carries all information on rating, size, valve body and trim material, customer tags. On body, marking includes material designations (per ASTM) and heat code and of course the trade mark.
Contact us if you need more details on Ball Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Metal Seated Ball Valve、Trunnion Mounted Ball Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.
API Trunnion Ball Valve
Design and Manufacture: API 6D, ASME B16.34(BS5351), API608, MSS-SP-72
Face to face dimension: ASME B16.10, API 6D
Flange connection dimension: ASME B16.5
BW connection dimension: ASME B16.5
Test and inspection: API 598, API 6D
Fire-safe design: API 607
MAIN FEATURES
Fire-SaFe Test
Approved trunnion ball valves are designed in accordance with API 607 & API SPEC 6FA. When non-metal seats are destroyed in a fire, the medium pressure push the upstream seat into the ball to cut off the line fluid and prevent internal leakage due to a secondary metal-to-metal seals. When the first soft seal is damaged, body, bonnet, stem-gasket can reach sealing function and prevent external fluid leakage.
Double body Gasket
All trunnion ball valves are equipped with two body gasket. The first body gasket is in soft material and the second in graphite (if not otherwise required), this combination assures the best seal characteristic in whatever corrosive service as well give fire safe design.
ANTi-static device In order to prevent static electricity which may light the fluid, static-conduction spring is set between the stem trunnion and the ball.
AnTi blow-ouT prooF STem
The stem is designed with integral T-Type shoulder to provide blow-out proof effectively. The design assures that the stem can not be blown out of the valve in the case of the packing being removed while the valve is under pressure.
CONTROLLED STEM & STUFFING BOX FINISH
Stem and stuffing box finish machining is a key point of control. The stem is made by cold rolling and stem surface finish is controlled by Ra=0.4, which can reduce friction for stem moving and ensure the seal. The stuffing box surface is controlled within Ra=1.6 for better sealing performance.
SOLID BALL
The solid ball used by FANGYUAN provides straight through flow and real full-port performance characteristics. Hollow ball or cored cavity ball are not used for products.
BALL SEAT ALIGNMENT
Stem/Flange mechanical stops ensure control and precise alignment over ball rotation.
LONGEVITY OF LIFE
Special consideration was devoted to the attainment of enhanced life and operation of our valve throughout design, development, testing and manufacturing stages. Valve designs combined with the selection of advanced materials are such that long periods of inactivity should not affect the operations of efficiency.
FLOW CAPACITY
Valve design allows for high flow capacity in liquid or gas services regardless of whether the media is clean or dirty. Full port valves allow for pigging and ensure maximum flow capacity.
FIELD REPARAIBLE
Simple user friendly design allows for quick and easy part replacement requiring minimal"Down Time".
EMERGENCY SEALANT INJECTION
For 6" full port and larger each valve is supplied complete with emergency stem sealant injection feature.
INSPECTION AND TESTING
Every valve is subjected on routine base to different non-destructive testing, like the dye penetrant test on butt weld ends, on all hard faced and cladding areas. Non-destructive test are also carried out on the critical areas as defined by ANSI B. 16.34.
Optional examinations like:
Radiographic
Magnetic particicles
Ultrasonic
MARKING AND IDENTIFICATION
Each valve is identified on proper name plate and on valve body as required by MSS- SP 25, B 16.34 Name plate carries all information on rating, size, valve body and trim material, customer tags. On body, marking includes material designations (per ASTM) and heat code and of course the trade mark.
| NO. | Part Name | CS to ASTM | AS to ASTM | SS to ASTM | |
| Type A105 | Type F22 | Type F304(L) | Type F316(L) | ||
| 1 | Body | A105 | A182 F22 | A182 F304(L) | A182 F316(L) |
| 2 | Gasket | Corrugated SS + graphite | SS + PTFE | ||
| 3 | Bonnet Bolt | A193 B7 | A193 B16 | A193 B8 | A193 B8M |
| 4 | Pin | A276 420 | A276 304 | ||
| 5 | Gland | A276 410 | A182 F304(L) | A182 F316(L) | |
| 6 | Gland Eyebolt | A193 B7 | A193 B16 | A193 B8 | A193 B8M |
| 7 | Gland Nut | A194 2H | A194 4 | A194 8 | A194 8M |
| 8 | Yoke Nut | A276 410 | |||
| 9 | H.W. Nut | A194 2H | A194 4 | A194 8 | A194 8M |
| 10 | Nameplate | SS | |||
| 11 | Hand wheel | A197 | |||
| 12 | Gland Flange | A216 WCB | A351 CF8 | ||
| 13 | Stem Packing | Flexible Graphite | PTFE | ||
| 14 | Bonnet | A105 | A276 304 | A182 F304(L) | A182 F316(L) |
| 15 | Stem | A182 F6 | A182 F304 | A182 F304(L) | A182 F316(L) |
| 16 | Disc | A276 420 | A276 304 | A276 304(L) | A273 316(L) |
| Suitable Medium | W.O.G. etc | W.O.G. etc | HNO3,CH3OOH etc | ||
| Suitable Temperature | -29ºC~425ºC | -29ºC~550ºC | -29ºC~180ºC | ||
Contact us if you need more details on Ball Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Metal Seated Ball Valve、Trunnion Mounted Ball Valve. If these products fail to match your need, please contact us and we would like to provide relevant information. Product Categories : Trunnion Ball Valve
Email to this supplier
Premium Related Products
Other Products
Hot Products
QE series pneumatic quick exhausting valve air exhaust valveLow Price 100-400 Series Vale Manifolds Solenoid Valve BaseSMC Air Filter Combination Air source treatment for AC3000-033/2Way Airtac Solenoid Valve AC110V With 3V210-08DMF-Z Series Air Pneumatic Pulse Valve For High Quality4/2Way Pneumatic AC220V Electric Control Valve With Q24DH-08Ningbo K Series Pneumatic Vibrator for Low PriceAPL-2N Series 12V Pneumatic Limit Switch With High QualityChina Wholesale Quick Connect Tube Plastic Pneumatic Fitting With PC1/4-02Hot Selling AT-32 Pneumatic Actuator With High QualityDN50 Stainless Steel Body 3PCS Pneumatic Ball Valve With Q611F-16PSC Type Standard Pneumatic Series Air Cylinder For Double ActingGood Price US Series Pilot-Operated Steam Solenoid Valve For G PT NPTTwo-way Double Actuator Piston-Operated Angle Seat Valve With Plastic HeadNormally Closed Stainless Steel Fluid Solenoid Valve 2S200-20Two-Way Direct Acting Water Solenoid Valve 2W160-15